Physical Dimension Parameter List

suited autos	auto model	medium-sized	large-scale	Super huge
	auto size(mm)	L×W×H 4700×1800×1450	L×W×H 5000×1850×1550	L×W×H 5300×1900×1550
	auto weight(kg)	≤1500	≤1700	≤2100
requirement space	A(mm)	2300	2400	2500
	B(mm)	5400	5700	6000
	C(mm)	≥5650	≥5950	≥6250
	D(mm)	≥7050	≥7350	≥7650
	E(mm)	≥5200	≥5500	≥5800
	F(mm)	D+ upright post width
	Clear height(mm)	≥3600
	foundation ditch depth	≥2000

Performance Parameter List

driving	motor chain
electromotor	up-and-down:3HP(2.2KW) cross-sliding:1/2HP(0.37KW)
Up-and-down speed	up-and-down:4m/min cross-sliding:8m/min
operation	Button
control	PLC logic programmed auto control
power supply	Three phase five wire system 380V/50HZ 3KVA
security devices	●caution device in operation	●anti-falling device
	●emergency stop device	●up-and-down limit protector
	●electric current overload protector	●cross-sliding limit protector
	●entrance optoelectronic detector	●up-and-down location button
	●auto wheel stop lever	●power cut braking device
	●cross-sliding location button	●security interlock device
	●chain protective sleeve	●over length detector

Engineering requirement

1、Ground must be reinforced concrete structure to fix equipment.
2、Ground surface must be smooth and the height difference should be within ±5 mm.
3、If equipment established outdoors, a flashing board is required.
4、Both ends of upright post are fixed to ceiling and ground by setscrews.
5、Each control system should have a space for oil-pressing machine.
6、A clear height (from fire pipes or vent pipes to ground level) of 3600 mm is required.
7、Enough power resource is required.